Description
Single sided, full color digital prints on white 4mm (aprox. 3/16″ thick) corrugated plastic, “Coroplast.” These prints are outdoor durable for up to one year without lamination. These signs can be used on wire yard stake, dropped into “A” frame sign holders or taped to our Signicades. Please specify in order notes if flute direction is important.
Coroplast® and corrugated plastic sheets are 100% RECYCLABLE. We encourage the recycling of Coroplast plastic sheets. Due to the durability of Coroplast it can often be reused. If the product is no longer usable we recommend removing any non-polypropylene accessories if applicable and recycling. Polypropylene is coded 5 by the Society of the Plastics Industry.
Specifications
PRINTED SIDES: One
PRINT METHOD: High Gamut 6 Color Process (C, M, Y, K, Lc, Lm)
USE: Indoor or Outdoor – Fire retardant, meets NFPA 701
WEIGHT: aprx. 4lb per 48×96 inch sheet
THICKNESS: 4mm
FINISH: Low Glare Sating Finish; Internal corrugation shows slightly on surface textue.
Sizes & Finishing
SIZES:
Coroplast signs can be made any size up to a full sheet. Some typical sizes include::
16×12 Inches (small yard signs)
24×18 Inches (standard yard signs)
24×36 Inches (meeting room sign or large yard signs)
36×48 Inches (convention and meeting signs)
MAXIMUM SIZE:
48 x 96 inch sheet (maximum print area 47.5 x 91 inches)
60 x 120 inch sheet (maximum print area of 59 x 114 inches)
Larger images can be tiled onto multiple sheets
FINISHING OPTIONS:
TRIM TO SIZE: Trimmed to size. No grommets included but can be added upon request in your special instructions. Not recommended for outdoor banners.
CORNER GROMMETS: Brass Corner Grommets in each corner. For larger sizes center grommets are optional on edges longer than 30 inches.
VELCRO CORNERS: An approximately 2×2 inch square of hook and loop Velcro® in each corner. Loop side is applied to sign. Hook side should be applied to sign holder.